Home

Create a free PRO Account for FREE, SAME DAY SHIPPING on thousands of Plumbing, HVAC, Hydronics, PEX, Tools, Lighting Products, Parts & Accessories on orders over $99*!

*Some restrictions may apply.
Track My OrderFREE PRO Account
Home
Home
Need Help?
Sign In
Sale
loading content
Watts_0650235_HR.jpg

SEA TECH 1/2 in CTS End Cap, Push Fit, Type 45

Watts
SKU3545B-10

Documents

Watts_0472037_Catalog.pdf
Watts_Water_0650235_Specification_Sheet.pdf
Watts_0472037_Catalog.pdf
Watts_Water_0650235_Specification_Sheet.pdf

Description

WATTS® quick-connect Tees are designed and manufactured for many years of trouble free service. Produced of off white Polysulfone, a high performance thermal plastic material, the WATTS® quick-connect design allows for quick and easy connections without the use of installation tools.

$5.40

each
3 In Stock

Please note this product is non returnable

or for lower prices
  • Connection shall be made using WATTS® Series 35 Quick-Connect fitting with Integral Collet and O-ring guide
  • Fitting shall be able to fully rotate under pressure and allow for easy disconnect and reuse without the use of disconnection tools
  • Fitting must not disassemble to disconnect
  • The wetted surface of this product contacted by consumable water contains less than 0.25% of lead by weight
  • The polysulfone material used in the quick-connect fittings can be compromised by exposure to volatile organic compounds (VOC's) and caustic chemicals
  • Do not expose this product to any such chemical or foreign substance, which would include exposure to the following products like pipe dopes (thread sealants), bug sprays, lubricants, cleaners, paints, bleaches, acids, solder fluxes, plastic piping primers and cements, oxidizing agents, alkaline solutions, thinners, fuels, oil based caulks, hydrocarbons, spray foam of foaming agents (insulation)
  • It is also recommended that all threaded connections be made with PTFE tape only
  • Therefore, do not expose this product to any such chemical or foreign substance, which would include exposure to the following products, pipe dopes (thread sealants), bug sprays, lubricants, cleaners, paints, bleaches, acids, solder fluxes, plastic piping primers and cements, oxidizing agents, alkaline solutions, thinners, fuels, oil based caulks, hydrocarbons, spray foam of foaming agents (insulation)
Nominal Size: 1/2 in
Fitting/Connector Type: Cap
End Style: Push
Material: Polysulfone
Series: 3545B

*Select oversized items may incur additional shipping charges, including freight fees. Review our full Shipping Policy for details.