HV NFI Cast Iron 1/6 hp 3-Piece Circulator Pump w/ Flanges
SKU102210
Description
Bell & Gossett in-line three-piece booster pumps are designed for hydronic systems. Series 100 and HV are Listed with Underwriter's Laboratories.$1,227.29
each1 In Stock
or for lower prices
- The heart of the booster. The finest circulator motor available. Sleeve bearing, oil lubricated with replaceable resilient motor mounts. B&G motors are designed and manufactured specifically for the B&G boosters.
- Noise dampening coupler. B&G’s own flexible spring design adds to quiet operation. Do not accept a substitute.
- Long bronze sleeve bearings maintain exact shaft alignment. Provides for constant circulation of oil over bearing surfaces.
- Precision ground pump shaft is oversized to provide large bearing surfaces. Hardened integral thrust collar minimizes end-thrust to ensure long seal and bearing life.
- The B&G mechanical seal is designed to withstand the wide range of water temperatures, pressures, additives and dissolved solids common in hydronic systems.
- Centrifugal impeller prevents accumulation of air at seal faces to assure long life. Close impeller/body tolerances minimize water slippage and maximize efficiency.
- Drip proof motors
- Recommended for indoor use only
- Model HV NFI
- Type: Single Speed, Cast Iron, 3-PieceSeries: HVVoltage Rating: 115Maximum Head: 12 ftFlow Rate: 40 gpmMaximum Pressure: 125 psiAmperage Rating: 1.9Dimensions: 15-3/8 L x 8-1/2 H inFrequency Rating: 60 HzImpeller Type: PhenolicMotor Speed: 1725 rpmMounting Type: FlangePhase: 1Power Rating: 1/6 hpTemperature Rating: 225 deg F
- CSA Certified
- cUL/UL Listed
- SA Registered
- For hydronic heating and cooling systems, domestic water and industrial applications