Home

A scheduled site upgrade will take place from Sat., 10/25 until Sun., 10/26. Minor disruptions to pricing, orders, or inventory may occur. Thank you for your patience as we work to improve your experience.

Track My OrderFREE PRO Account
Home
Home
Need Help?
Sign In
loading content
Zoeller_53_0001_HR.jpg

3/10 HP Automatic Effluent/Dewatering Submersible Pump

Zoeller
SKU53-0001

Documents

Zoeller_53_0001_Catalog.pdf
Zoeller_53_0001_Manual.pdf
Zoeller_Company_530001_Specification_Sheet.pdf
Zoeller_53_0001_Catalog.pdf
Zoeller_53_0001_Manual.pdf
Zoeller_Company_530001_Specification_Sheet.pdf

Description

The Mighty-Mate series of submersible pumps is designed for use in residential or light commercial dewatering applications and can be used to transfer groundwater or effluent. Cast iron models include a epoxy powder coated finish to prevent corrosion and are designed to provide great heat dissipation from the motor, ensuring a long service life. As with every Zoeller® pump, each one is 100% pressure-tested, submerged and run to ensure quality and reliability for years of trouble-free performance. This attention to detail is an inherent feature of every pump in this series, making it one of the most reliable in the industry.

$224.25

each
20 In Stock
or - Free Same Day Shipping & Lower Pricing.
  • Corrosion-resistant, powder coated epoxy finish
  • No sheet metal parts to rust or corrode
  • Stainless steel screws, switch arm, guard and handle
  • No screens to clog, watertight, neoprene square ring between motor and pump housing
  • Solid, buoyant, polypropylene float, oil filled, hermetically sealed, automatic reset thermal overload protected motor
  • Upper and lower sleeve bearings running in bath of oil, Entire unit pressure-tested after assembly, carbon and ceramic shaft seal
  • Watertight and dust tight, permanently oiled bearings
  • Cast iron switch case, motor and pump housing, engineered thermoplastic base, glass filled, plastic impeller with metal insert
  • Entire unit pressure-tested after assembly
  • Class B insulation, 7-1/4 in/3 in auto On/Off points
  • 1/2 in spherical solid handling, 9 ft cord, oil filled cooling
  • Cast iron cap, motor and pump housing, base, carbon and ceramic mechanical seals, engineered plastic impeller, stainless steel hardware, neoprene gasket
  • AISI 1215 cold roll steel motor shaft
  • Single phase, shaded pole, 3 wire cord and plug
  • 1-1/2 in NPT discharge
Horsepower: 3/10
Outlet Size: 1-1/2 in
Series: Mighty-Mate M53
Maximum Head: 19-1/4 ft
Type: Automatic
Cord Type: 3-Wire
Amperage Rating: 9.7
Bearing Type: Sleeve
Dimensions: 10.0625 in H x 10.06 in W in
Flow Rate: 43 gpm
Frequency Rating: 60 Hz
Impeller Type: Non-Clogging Vortex
Material: Cast Iron
Motor Speed: 1550 rpm
Phase: 1
Temperature Rating: 130 deg F
Voltage Rating: 115