Automatic Condensate Removal Pump 65 GPH
SKUVCMA-15ULS
Description
Designed for automatic collection and removal of condensate from air conditioning, refrigeration and dehumidification equipment when gravity drainage is not possible or practical. Also suitable for high efficiency oil and gas-fired condensing furnace and condensing boiler equipment.$54.96
each102 In Stock
or for lower prices
- 1/2 ga collection tank
- Thermally protected, fan cooled motor
- Built-in wall mount tabs on tank
- Removable pump float locking tab for safety during transportation (remove at time of installation)
- Maximum water temperature 140 deg F
- 6 ft, 3 conductor cable with grounded 3 prong plug
- Some models include 20 ft x 3/8 in ID vinyl discharge tubing
- For removal of condensate from air conditioners, suitable for high efficiency, gas furnace condensation and condensing boilers
- 115 V, 60 Hz
- 65 gph at 1 ft head, 50 gph at 5 ft head, 25 gph at 10 ft head
- Housing/tank cover, motor cover, volute and tank
- Glass filled polypropylene impeller, vertical centrifugal pump design, automatic start and stop operation, some models equipped with float (solid polymer) activated switch for automatic high level water detection (safety overflow switch)
- For models with safety overflow switch - dual function no and NC operation (set to no from factory for equipment shut down connection)
- Models equipped with safety overflow switch include two 5 in switch lead wires
- 3/8 in OD barbed discharge adapter with built-in check valve
- Three 1-1/8 in Dia inlet openings (two fitted with removable cap plug)
- Type: AutomaticSeries: VCMA-15ULSFlow Rate: 65 gphImpeller Type: Glass-Filled PolypropyleneMaterial: ABSMaximum Pressure: 6.5 psiMounting Type: WallOutlet Size: 3/8 in OD BarbedPower Rating: 60 WReservoir Capacity: 1/2 galShutoff Head: 15 ftTemperature Rating: 140 deg F
- cCSAus Certified
- Safety Overflow Switch
- Air Conditioner, Condensing Boilers, High Efficiency and Gas Furnace Condensation