Megaloc High Performance Multi-Purpose Pipe Thread Sealant, 8 oz Screw Cap Can with Brush, Blue
SKU15806
Description
Multi-purpose thread sealant made with DuPont™ KEVLAR® for use on metals including steel, stainless steel, brass, copper, aluminum and on plastics including PVC, CPVC and ABS. Leak free joints can be tested and put into service at once. Megaloc® wipes clean from hands and tools with a dry rag, is odor free, grit free and will not separate or settle. Megaloc® does not harden, crack or become brittle; joints can be disassembled without damage to pipe, fittings or threads years after the joint was made. Megaloc® is applied easily with a natural bristle brush even at temperatures as low as -25 deg F and performs over a temperature range of -50 to 400 deg F. It provides leakproof hydraulic resistance to 12000 psi and withstands gas pressure up to 2600 psi. Megaloc® is non-toxic, non-hazardous and non-flammable. It contains no lead, heavy metals or volatile solvents.- Odorless formula is non-separating, non-flammable and non-hazardous
- Seals plastic and metal pipes and fittings
- Performs over a range from -50 to 400 deg F
- Safe for drinking water lines
- In-lid applicator
- Sets soft with no cure time required
- Wipes clean from hands and tools and washes out of clothes
- Resists hardening and cracks
- Hydraulic resistant to 12000 psi
- Withstands gas pressure to 26 psi
- Grit free
- Series: MEGALOCType: High Performance Multi-PurposeColor: BlueContainer Size: 8 ozBonds To: Aluminum, Black Iron, Brass, Copper, Glass, Monel, Fiberglass, Polyethylene, Nylon Plastic, PVC, CPVC, ABS, Stainless Steel and Galvanized SteelComposition: Petroleum Based Lubricating Oil, Kaolin, Talc, Magnesium Carbonate, Poly (p-Phenylenediamine Terephthalamide), Titanium Dioxide, Silica, Amorphous, FumedContainer Type: Screw Cap Can with BrushFlash Point: >212 deg FOdor/Scent: OdorlessTemperature Rating: -50 to 400 deg FViscosity Rating: 30000 cPVOC Content: 4 g/L
- Acids, Dilute, Air, Compressed, Ammonia, Gaseous and Liquid, Aliphatic solvents, Caustics, Dilute, Cutting Oils (Low Aromatic), Diesel Fuel Oil, Freons, Gasoline, Heating Oils, Helium, Gaseous, Hydraulic Oils, Hydrogen, Gaseous, Inert Gases, Jet Fuel, JP-3, 4 and 5, Kerosene, Mineral Oils, Natural Gas, Nitrogen, Gaseous, Petroleum Solvents, Soap, Liquid, Steam, Vegetable Oils, Water (Hot or Cold)
- CSA ANSI LC 7-2009
- CAN/ULC-S642-07
- cCSAus Certified
- Military Specification TTS-1732/A-12342a
- NSF/ANSI 61
- UPC Listed
- PROP65: Cancer - www.P65Warnings.ca.gov
- IAPMO Listed