Home
Home
Home
Need Help?
Sign In
loading content
Xylem_102206_HR.jpg

HV NFI Cast Iron 1/6 hp 3-Piece Circulator Pump w/ Flanges

SKU102210

Description

Bell & Gossett in-line three-piece booster pumps are designed for hydronic systems. Series 100 and HV are Listed with Underwriter's Laboratories.

$1,227.29

each
2 In Stock
or for lower prices

Have a question? Call or text us at 855-793-7877.

  • The heart of the booster. The finest circulator motor available. Sleeve bearing, oil lubricated with replaceable resilient motor mounts. B and G motors are designed and manufactured specifically for the B and G boosters.
  • Noise dampening coupler. B and G’s own flexible spring design adds to quiet operation. Do not accept a substitute.
  • Long bronze sleeve bearings maintain exact shaft alignment. Provides for constant circulation of oil over bearing surfaces.
  • Precision ground pump shaft is oversized to provide large bearing surfaces. Hardened integral thrust collar minimizes end-thrust to ensure long seal and bearing life.
  • The B and G mechanical seal is designed to withstand the wide range of water temperatures, pressures, additives and dissolved solids common in hydronic systems.
  • Centrifugal impeller prevents accumulation of air at seal faces to assure long life. Close impeller/body tolerances minimize water slippage and maximize efficiency.
  • Drip proof motors
  • Recommended for indoor use only
  • Model HV NFI
Type: Single Speed, Cast Iron, 3-Piece
Series: HV
Voltage Rating: 115
Maximum Head: 12 ft
Flow Rate: 40 gpm
Maximum Pressure: 125 psi
Amperage Rating: 1.9
Dimensions: 15-3/8 L x 8-1/2 H in
Frequency Rating: 60 Hz
Impeller Type: Phenolic
Motor Speed: 1725 rpm
Mounting Type: Flange
Phase: 1
Power Rating: 1/6 hp
Temperature Rating: 225 deg F

*Select oversized items may incur additional shipping charges, including freight fees. Review our full Shipping Policy for details.