Southwire’s 600 Volt Type TC-ER control cables are suited for use in wet and dry areas, conduits, ducts, troughs, trays, direct burial, aerial supported by a messenger, and where superior electrical properties are desired. These cables are capable of operating continuously at the conductor temperature not in excess of 75°C in wet locations and 90°C in dry locations, 130°C for emergency overload, and 250°C for short circuit conditions. For uses in Class I, II, and III, Division 2 hazardous locations per NEC Article 501 and 502. Constructions with 3 or more conductors are listed for exposed runs (TC-ER) per NEC 336.10
$87.85
roll
1 In Stock
50 ft Spoolshow options
or for lower prices
Conductor: 7 strands class B compressed bare copper per ASTM B3 and ASTM B8 for 14, 12, and 10 AWG cables. 26 strands class K bare copper per ASTM B3 and B174 for 16 AWG cables
Insulation: Polyvinyl Chloride (PVC) with nylon layer THHN, 19 Mils thick for 16, 14, 12 AWG cables and 24 Mils for 10 AWG cables, Type TFFH for 16 AWG cable and Type THHN or THWN for 14, 12 , 10 AWG cables
Filler: Polypropylene filler on cables with 5 or less conductors
Binder: Polyester flat thread binder tape applied for cables with more than 5 conductors
Overall Jacket: Polyvinyl Chloride (PVC) Jacket
Specifications
Back To Top
Conductor Type: Stranded
Insulation Material: PVC
Jacket Material: PVC
Outside Diameter: 0.35 in
Strands: 7
Temperature Rating: -40 to 90 deg C
Type: Mini Split Unshielded Twisted Pair
Series: 5822570
Conductor Size: 14 AWG
Number of Conductors: 4
Jacket Color: Black
Length: 50 ft Spool
Voltage Rating: 600
Application
Back To Top
Mini Split
*Select oversized items may incur additional shipping charges, including freight fees. Review our full Shipping Policy for details.